GMC-I Messtechnik GmbH
15
7
Maintenance
7.1
Unit of Measure and Laser On/Off Switches
Temperature can be displayed in either °C or °F. Switch positions for
switching back and forth between °C and °F, as well as for switching
the laser on and off, are depicted in the following figure.
Pull the battery compartment lid (at the bottom
of the instrument) out towards the side with
the operating controls, all the way in to the end
position, and then fold it down as shown in
steps 1 and 2 in the figure. In order to close
the battery compartment lid, fold it back up
again such that the four guide pins fit into the
openings provided for this purpose. Push the
lid all the way back into its end position.
7.2
Battery Replacement
The battery is located in the same compartment as the unit of measure
and laser on/off switches (to open see chapter 7.1).
Make sure that no battery leakage has occurred before initial start-up,
and after long periods of storage. Continue to inspect the batteries for
leakage at short, regular intervals.
If battery leakage has occurred, carefully and completely clean the
electrolyte from the instrument with a damp cloth, and replace the
battery before using the instrument.
When the“
” symbol appears at the display, or if background
illumination is only activated briefly after pulling the trigger, the battery
should be replaced as soon as possible. You can continue working
with the instrument, but reduced measuring accuracy may result.
Please dispose of depleted batteries in accordance with environmental
protection regulations!
Note!
Measuring parameters remain in memory during battery
replacement.
°C / °F
Laser On/Off
