manualshive.com logo in svg

Gossen MetraWatt METRA HIT 27EX, Operating Instructions Manual, Page: 33 / 36

Share
Download
Gossen MetraWatt METRA HIT 27EX Operating Instructions Manual Download Page 33

GMC-I Messtechnik GmbH

33

GB

10.4 Collection of Used Instruments and Environmentally 

Compatible Disposal

The milliohmmeter is a category 9 product (monitoring and 
control instrument) in accordance with ElektroG 

(German 

Electrical and Electronic Device Law)

. This device is sub-

ject to the RoHS Directive. Further-more, we make refer-
ence to the fact that the current status in this regard can 
be accessed on the Internet at www.gossenmetra-
watt.com by entering the search term WEEE.
We identify our electrical and electronic devices in 
accordance with WEEE 2012/19/EU and ElektroG 
with the symbol shown to the right per DIN EN 
50419. These devices may not be disposed with 
the trash. Please contact our service department regarding 
the return of old devices. (see chapter 12). 
If you use type-tested 

batteries 

in your instrument or acces-

sories which no longer function properly, they must be duly 
disposed of in compliance with the applicable national reg-
ulations.
Batteries or rechargeable batteries may contain harmful 
substances or heavy metal such as lead (PB), cadmium 
(CD) or mercury (Hg).
They symbol shown to the right indicates that 
batteries or rechargeable batteries may not be 
disposed of with the trash, but must be delivered 
to collection points specially provided for this 
purpose.

11

System Messages

The following messages appear at the main display, or the 
auxiliary displays as required. See “Symbols used in the 
Digital Display” on page 3 for messages displayed at visible 
segments.

Blinking Unit of Measure

All measuring functions are balanced for each METRA 
HIT

⏐

27EX

 at the factory in accordance with the respective 

technical specification. If a unit of measure blinks, this indi-
cates that balancing constants which have been estab-
lished and saved to the milliohmmeter are no longer avail-
able for the respective function. If this is the case, mea-
surement results may deviate from the specification. We 
recommend sending the instrument to our Repair and 
Replacement Parts department for rebalancing (see chap-
ter 12).

Message

Function

Meaning

0

. 

L

Measuring

Indicates overflow

open

 

L

4-wire-m

Ω

Measuring current interrupted or fuse defective. 

Pb Cd Hg

Summary of Contents for METRA HIT 27EX





































Reviews:

No comments