Goslyn – Oil Recovery Program
Page
5
equipment involved
…
The following is a list of all of the necessary equipment associated with the installation of the
goslyn™.
•
Rotisserie Ovens
•
goslyn™ (model GOS40) Automatic Grease Recovery Device (AGRD)
•
goslyn™ Grease Stand (CDSTD-‐10) on 6 inch casters (placed under GOS40, to raise it 15
inches to allow an optional bucket to fit under the goslyn™ to catch the grease.
•
goslyn™ Low Drain Pump System (LDPS-‐10) -‐ hung on side of goslyn™ Grease Stand, very
low to floor-‐ used to pump effluent from bottom rotisserie ovens up into GOS40
•
goslyn™ Control Panel (hangs on the side of the Low Drain Pump System) -‐ used to
power and control the sensors/pumps for the Low Drain Pump System.
•
120 volt 20 amp duplex outlet power supply located next to the goslyn. Power must be
available and on 24 hours per day.
•
Copper pipe and fittings in various lengths and diameters (see below)
•
1 ½” brass unions to use as disconnects so the ovens can be moved for cleaning.
goslyn™
separator
grease
stand
low drain
pump system
