Gorilla Playsets 1500HWF, Manual

Page: 97 / 177

PANEL BOARD
T-NUT
DETAIL A
5/16" WASHER
RAILING
UPPER LEVEL STEP/
REAR BOTTOM
2 X 6 X 42-1/2"
2" WOOD SCREW
2 X 4 X 70"
2 X 4 X 35-5/8"
UPPER LEVEL
REAR CENTER
POST
A
2 X 4 X 70"
UPPER LEVEL STEP/
RAILING
B
3/8 X 5"
REAR CENTER POST
LOWER LEVEL
DETAIL B
LAG SCREW
3/8" WASHER
4 X 4 X59-1/2"
5/16 X 2-1/2"
HEX BOLT
4 X 4 X 33-5/16"
UPPER LEVEL
CENTER POST
STEP 43: REAR CENTER POST/CENTER POST
1: HAMMER A T-NUT INTO THE HOLE OF A 2 X 4 X 35-5/8" UPPER LEVEL REAR CENTER POST.
2: PLACE THE CENTER POST INSIDE THE RAILING AT THE REAR OF THE PLAYSET. LINE UP THE HOLE IN THE CENTER
POSTS WITH THE HOLE IN THE RAILING.
3: FASTEN THE CENTER POST UPPER LEVEL TO THE RAILING WITH A 5/16" X 2-1/2" HEX BOLT AND A 5/16" WASHER AT
THE TOP.
4: SQUARE THE CENTER POST UPPER LEVEL TO THE DECK AND SECURE THE BOTTOM OF THE CENTER
POST UPPER LEVEL TO THE REAR BOTTOM PANEL BOARD WITH #8 X 2-1/2" WOOD SCREWS. SEE DETAIL A.
5: SQUARE THE 4 X 4 X 33-5/16" UPER LEVEL CENTER POST TO DECK SPACER. ATTACH IT TO THE LOWER LEVEL
CENTER POST USING 3/8 X 5" LAG SCREWS AND 3/8' WASHERS. SEE DETAIL B.
87