STEP 8
3
: STEERING WHEEL
1: GO TO THE REAR CENTER POST ON THE DECK (UPPER LEVEL).
2: DRILL A 3/16" PILOT HOLE 1" BELOW THE CENTER OF THE T-NUT. DRILL THE HOLE 2" DEEP.
3: PLACE THE STEERING WHEEL INSERT INSIDE THE STEERING WHEEL.
4: USE THE 2-1/2" LAG SCREW AND WASHER TO FASTEN THE STEERING WHEEL TO THE REAR
CENTER POST. DO NOT OVER-TIGHTEN THE LAG SCREW OR THE STEERING WHEEL WILL NOT
TURN.
5: PLACE THE STEERING WHEEL CAP OVER THE CENTER OF THE STEERING WHEEL AND
SNAP IT INTO THE STEERING WHEEL INSERT.
DRILL 3/16" HOLE
WASHER
T-NUT
2-1/2" LAG SCREW
1" BELOW THE T-NUT.
STEERING WHEEL
STEERING WHEEL INSERT
STEERING
WHEEL CAP
127
Summary of Contents for 1500HWF
