Gorilla Playsets 1500HWF, Manual

Page: 74 / 177

ROPE LADDER RUNNER
THIS IS THE VIEW AS IF YOU WERE STANDING AT THE FRONT - LEFT OF THE PLAY SET
3) TIE THESE THREE KNOTS BELOW THE ROPE LADDER RUNG.
ROPE LADDER SUPPORT
LADDER RUNG.
MARKS OR TAPE. TIE THREE KNOTS UNDER THE ROPE
5) SLIDE THE NEXT ROPE LADDER RUNG UP TO THE
LADDER SUPPORT AND TIE 3 KNOTS. THE BOTTOM OF EACH
1) TIE A KNOT IN EACH ROPE AND THREAD THEM
THROUGH THE BACK SIDE OF THE ROPE LADDER SUPPORT.
KNOT SHOULD BE 6" BELOW THE ROPE LADDER SUPPORT.
2) MEASURE DOWN 6" BELOW THE BOTTOM OF THE ROPE
6) REPEAT 4 & 5 FOR REMAINING ROPE LADDER RUNGS.
THE ROPE OR MARK WITH A PEN.
4) MEASURE DOWN 10-5/8" BELOW THE
ROPE LADDER RUNG AND PLACE TAPE ON
7) TIE KNOTS ON BACK SIDE OF ROPE LADDER RUNNER.
2.1) SLIDE A ROPE LADDER RUNG AGAINST THE THREE KNOTS.
6"
10 58 "
STEP 20: ROPE LADDER
1: FIND THREE ROPE LADDER ROPES. MAKE A KNOT IN THE END OF EACH ROPE AND THREAD THE FREE END THROUGH
THE BACK SIDE OF THE ROPE LADDER SUPPORT. PULL EACH ROPE TAUGHT.
2: MEASURE DOWN FROM THE BOTTOM OF THE ROPE LADDER SUPPORT 6 INCHES AND TIE A KNOT. THE BOTTOM OF THE
KNOT SHOULD BE 6 INCHES BELOW THE ROPE LADDER SUPPORT. SLIDE EACH ROPE THROUGH THE HOLES IN ONE ROPE
LADDER RUNG. SLIDE THE RUNG UP AGAINST THE BOTTOM OF THE KNOTS.
3: TIE THREE KNOTS BELOW THE ROPE LADDER RUNG.
4: MEASURE DOWN FROM THE BOTTOM OF THE ROPE LADDER RUNG 10-5/8 INCHES AND MAKE A MARK ON THE ROPE
WITH A PIECE OF TAPE OR A MARKER. THREAD ANOTHER ROPE LADDER RUNG ONTO THE ROPES.
5: WITH THE TOP OF THE RUNG EVEN WITH THE 10-5/8" MARK TIE THREE KNOTS BELOW THE SECOND ROPE LADDER
RUNG.
6: REPEAT SUBSTEPS 4-5 FOR THE REMAINING ROPE LADDER RUNGS.
7: THREAD THE BOTTOM END OF EACH ROPE THROUGH THE HOLES IN THE ROPE LADDER RUNNER AND TIE THEM OFF.
GRAB EACH ROPE AND ATTEMPT TO WRAP IT AROUND YOUR HAND. IF THE ROPE WRAPS AROUND YOUR HAND IT IS TOO
LOOSE. IF THE ROPE IS TOO LOOSE UNTIE THE KNOT BEHIND THE ROPE LADDER RUNNER AND RETIE IT UNTIL YOU CAN
NO LONGER WRAP THE ROPE AROUND YOUR HAND.
64