Gorilla Playsets 1500AWCR, Manual

Page: 100 / 136

OVERHANG OVERHANG
76-7/8" ROOF STARTER LENGTH
DIM B
72.75" EXAMPLE DIMENSION
DIM A
STEP 30: ROOF STARTER REAR
ATTACHING THE ROOF STARTER DIM B AT THE ROOF PEAK SHOULD MATCH DIM A. THIS WILL MAKE
4.125" DIVIDED BY 2 EQUALS 2.063" OVERHANG
PER SIDE.
THE ROOF SUPPORTS PARALLEL TO EACH OTHER. DUE TO WOOD MILLING VARIATIONS YOUR HOLES IN
2: FASTEN THE ROOF STARTER REAR TO THE ROOF SUPPORTS WITH 1-1/2" WOOD SCREWS.
BE PLACED FLUSHED TO THE PEAK OF THE ROOF SUPPORTS.
STARTER SHOULD BE CENTERED ON THE ROOF SUPPORTS, AND THE FLAT TOP END OF THE ROOF STARTER SHOULD
1: PLACE THE 1 X 4 X 76-7/8" ROOF STARTER REAR BOARD AT THE PEAK OF THE ROOF. THE HOLES IN THE ROOF
THE ROOF STARTER WILL EITHER BE CENTERED ON THE ROOF SUPPORTS OR THEY WILL BE OFFSET
EXAMPLE: 76-7/8" MINUS 72.75" EQUALS 4.125".
THE ROOF
NUMBER ON EACH SIDE TO KEEP YOUR ROOF SUPPORTS PARALLEL.
DIVIDE THIS NUMBER BY 2. THIS WILL GIVE YOU THE OVERHANG FOR EACH SIDE. USE THE OVERHANG
TOWARDS THE INSIDE OF THE ROOF SUPPORTS SLIGHTLY. SUBTRACT DIM A FROM 76-7/8" AND THEN
AT THE PEAK OF
ROOF SUPPORT
CORNER POST
ATTACHED TO
ROOF SUPPORT
BOTTOM OF
MEASURE DIM A ACROSS THE BOTTOM OF THE ROOF SUPPORTS NEAR THE CORNER POSTS. WHEN
TOP OF
ROOF SUPPORT
ROOF
STARTER
(3-1/4" WIDE)
1 X 4 X 76-7/8"
ROOF STARTER REAR
1-4-7688-RSR
1-1/2" WOOD SCREW
3 14 "
66