Gorgy Timing LEDI, User Manual

Page: 77 / 93

MDE-LEDI-1099V4.0 77
E
NG
LI
S
H
6.2.9. SNMP configuration web page « SNMP Configuration »
A. SNMP Configuration by web page
This page allows you to configure the parameters of the SNMP (Simple Network Management Protocol)
supervision server.
►
Product Name: This pre-filled field refers to the name of the product. It is available on its label on
the back.
►
Product Location: This field identifies the location of the product.
►
Contact: This field allows you to fill in a contact.
►
Product Description: This pre-filled field refers to the name of the product on its label on the back.
It cannot be modified.
Note: The maximum length of the fields described above is 50 characters. The characters available for
password selection are the 95 printable ASCII characters (except /=\):
!"#$%&'()*+,-.0123456789:;<>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`
abcdefghijklmnopqrstuvwxyz{}~
►
Community: The default community name is "public". This field is limited to 7 alphanumeric
characters. Only the devices indicating this community name can communicate with the product
with the SNMPv1 or SNMPv2 protocol.
►
Génération de Traps: The product can spontaneously send information to an SNMP Trap server
(up to 4 IPv4 Trap server addresses) to alert on certain events. These are listed in the following
table.