Gorgy Timing LEDI, User Manual

Page: 30 / 93

30 MDE-LEDI-1099V4.0
3.1.4. ASCII RS232 or RS485 Versions
►
Connect ASCII RS232 or RS485 signal on the plug-in terminal according to table below:
ASCII RS232C ASCII RS422/485
ASCII 1 Terminal TXD E / S -
ASCII 2 Terminal RXD E / S +
GND Terminal GND GND
►
After connecting the ASCII code, press the "reset" button on the back of the product.
3.1.5. SMPTE Version
►
Connect SMPTE signal on the terminals "ASCII" and "GND" (No polarity).
3.1.6. Ethernet or PoE NTP Version
►
Connect Ethernet cable on Ethernet port located at rear panel of the product.
3.1.7. Wi-Fi NTP Version
►
No special connections
3.1.8. TOP Option
►
Connect the cable on the both wires outgoing from the clock: brown wire and white wire
►
Static relay output: no polarity
►
TTL 50 ohms output: brown wire is GND, white wire is positive impulse
►
Sine wave output 1000Hz: brown wire is GND, white wire is frequency
3.1.9. ASCII RS232 or RS485 output option
►
Connect the ASCII RS232 or RS485 code on the terminal plug following the table below:
ASCII RS232C ASCII RS422/485
ASCII 1 Terminal TXD E / S -
ASCII 2 Terminal RXD E / S +
GND Terminal GND GND
►
After connecting the ASCII code, press « reset » button on the rear of the item.