440
2
7
0
• To replace the door, observe the reverse order.
Note: To replace the glass, make sure the markings
(crescent) on the door and the glass are aligned
(Figure 4).
REMOVING AND REPLACING THE OVEN DOOR WITH A
SINGLE-AXIS HINGE (depending on the model)
a) Conventional closing
b) Soft closing system (GentleClose) – the system absorbs
the shock from door closing. It allows simple, quiet, and
smooth closing. A gentle push (to a 15° angle relative to
the closed door position) is enough for the door to close
automatically and softly.
• Fully open the oven door and rotate the stoppers all the
way back – applies to conventional door closing (Figure 1).
• If the appliance is fi tted with the GentleClose system, fl ip
the door latches back to a 90°angle (Figure 2).
fi gure 4
If the force applied to close the door is too strong,
the effect of the GentleClose system is reduced or
the system will be bypassed for safety.
fi gure 1
fi gure 2
26
Summary of Contents for simplicity BO71SY2B
