440
2
7
0
• If the appliance is fi tted with the GentleClose system,
slightly lift the door latches and pull them towards you.
• Slowly close the door until the latches are aligned with
the slots. Slightly lift the door and pull it out from both
hinge slots on the appliance.
• Then, completely open the door and rotate the attachment
clips back to their initial position. Slowly close the door and
check, if they close properly. If the door does not open or
close correctly, make sure whether the hinge notches are
correctly placed in their seat hinges.
Attention
Always make sure the hinge attachment clips are fi rmly
seated in their supports when installing the door. If this is not
the case, the main hinge that is operated by a strong spring
may be released any time while installing or removing the
door. Risk of physical injury.
• Oven door is fi tted with a door lock that prevents it
from being open until the lock is released. Door lock is
opened by a slightly pressing your thumb to the right
and simultaneously pulling the door outwards.
• When the oven door is closed, the door lock
automatically returns to its initial position.
Note:
If the door lock is supplied with the appliance,
attach it under the appliance control panel in compliance
with the instructions for installation, which are supplied
with the lock.
The oven lamp base and socket are under voltage. There
is a risk of electric shock!
Before replacing the oven lighting bulb, disconnect the
appliance from the power mains by removing the fuses or
tripping the main network switch.
fi gure 3
Door lock (only with
some models)
Replacing appliance
parts
27
Summary of Contents for simplicity BO71SY2B
