Gorenje KAT35MINV, Installation Manual

Page: 41 / 112

13
INSTALLATION INSTRUCTIONS
b. After installing the body, please fasten the
installation paper board onto the air
conditioner with bolts (M5 x 16) to determine
in advance the sizes and positions of the
hole opening on ceiling. Please, first
guarantee the flatness and horizontal of
ceiling when installing it. Refer to the A.a
mentioned above for others.
c. Refer to the A.c mentioned above for
installation.
d. Remove the installation paper board.
2. Install the panel
CAUTION
•
Never put the panel face down on floor or
against the wall, or on bulgy objects.
•
Never crash or strike it.
(1) Remove the inlet grid
a. Slide two grid switches toward the middle at
the same time, and then pull them up. (Refer
to Pic.21)
b. Draw the grid up to an angle of about 30°,
and remove it. (Refer to Pic.22)
(2) Install the panel
a. Align the swing motor on the panel to the
water receiver of the body properly. (Refer to
Pic.23)
b. Hang the four fixed rope of the main body to
the installation cover and the other three
covers of the swing motor: (Refer to Pic.23 )
CAUTION:
The installation cover of the swing motor must
sink into the corresponding water receiver.
Picture 20
Picture 21
Picture 22
Picture 23