Gorenje KAT35MINV, Installation Manual

Page: 33 / 112

5
INSTALLATION INSTRUCTIONS
•
Consult local codes regarding rooftop mounting . If the outdoor unit is installed on
roof structures or external walls, this may result in excessive noise and vibration,
and may also be classed as a non-serviceable installation.
Tools needed for installation
•
Level gauge
•
Screwdriver
•
Electric drill, Hole core drill (65 mm)
•
Flaring tool set
•
Specified torque wrenches: 18 Nm, 42 Nm, 55 Nm, 66 Nm (different
depending on model No.)
•
Spanner (half union)
•
Hexagonal wrench of suitable dimensions
•
Gas-leak detector, Vacuum pump, Gauge manifold
•
Thermometer, Multimeter, Pipe cutter, Measuring tape
•
User’s manual
Accessories
Nr. Name Quantity
1 Installation Plate 1
2 Clip Anchor 5 – 8
(depends on a model)
3 Self-tapping Screw A ST3.9X25 5 – 8
(depends on a model)
4 Seal (picture 14) 1
5 Drain Joint (picture 14) 1
6
Connecting
pipe Assembly
Liquid side
1/4'' (
∅
6,35)
Parts you must purchase
Consult the technician for
the proper size.
Gas side
3/8'' (
∅
9,52)
7 Remote controller 1
8 Self-tapping Screw B
ST2.9X10 Depends on the model 2
9 Remote controller holder 1
10 Transfer connector
(NOTE: Pipe size differs from appliance to appliance. To
meet different pipe size requirement, sometimes the pipe
connections need the transfer connector to install on the
outdoor unit.) 1 (on some models)
11 Magnetic ring
(Hitch it on the connective cable between indoor unit and
outdoor unit after installation.) Optional part (one piece /
one cable
Note:
Except the parts mentioned in accessories table, you must purchase all other parts needed
during installation.