Gorenje KAT35MINV, Installation Manual

Page: 36 / 112

8
INSTALLATION INSTRUCTIONS
2.
Drill a hole in the wall
1. Determine hole positions according to
the diagram detailed in Fig.5. Drill
one (1) hole (65 mm) slanting slightly
to outdoor side.
2. Always use wall hole conduit when
drilling metal grid, metal plate or similar materials.
3.
Connective pipe and drainage installation
Drainage
c) Run the drain hose sloping downward. Do not install the drain hose as
illustrated below.
Do not block water flow by a rise. Do not put the end of drain hose into water.
Picture 7
d) When connecting extension drain hose, insulate the connecting part of
extension drain hose with a shield pipe, do not let the drain hose slack.
Connective pipe
1.
For the left-hand and right-hand piping, remove the pipe cover from the side
panel.
- Explain to clients that the pipe cover must be kept as it may be used when
relocate the air conditioner to any other place.
2. For the rear-right-hand and rear-left-hand piping, install the piping as shown.
Bend the connective pipe to be laid at 43 mm height or less from the wall.
3. Fix the end of the connective pipe. (Refer to Tightening Connection in
REFRIGERANT PIPING CONNECTION).
Picture 8
Picture 9
Picture 6