EN
8
ELECTRONIC PROGRAM TIMER
A
Function selection knob
1
Oven delayed start
2
End oven operation
3
Minute minder
4
Time display
5
Clock
Select the time settings by consecutively pressing
the (A) knob. Selected symbol will flash on the
display. Rotate the (A) knob to set the function
and press to confirm. Clock hands will
automatically move to time display. The set
symbols will remain lit.
Each time you press the (A) knob, this will be
confirmed by a short acoustic signal.
Press and hold the (A) knob for 2 seconds to
delete the set function.
SETTING THE TIME OF DAY
If the time display symbol (4) is flashing (after
connecting the appliance for the first time or
following a power failure), press the (A) knob and
hold it for two seconds until the flashing stops.
Then select the time display (4) by consecutively
pressing the (A) knob. Time display will flash
when selected.
Rotate the (A) knob to set the time.
Confirm the setting by pressing the (A) knob
again. If nothing is pressed, the setting will be
stored automatically after a few seconds.
OVEN OPERATION WITHOUT TIMER
SETTINGS
After connecting the appliance to the power
mains for the first time or after a power supply
failure, time display symbol (4) will flash.
In order for the oven to operate, press the (A)
knob and hold it for two seconds. Time display will
stop flashing.
The oven can be used without restrictions if no
timer settings are made.
OVEN OPERATION WITH PROGRAM
TIMER SETTINGS
Program timer can be used to program oven
operation in two ways:
Setting the stop time
- the oven will stop
operating at the preset time.
Setting
delayed
start
-
the
oven
will
automatically start and stop operating at a preset
time.
SETTING THE STOP TIME
This mode allows you to set the time at which you
wish the oven to stop operating. The longest
possible setting is 15 hours from the current time.
Check if the clock is set accurately to current
time.
Select the (2) symbol by consecutively pressing
the (A) knob until the symbol starts to flash.
Rotate the (A) knob to set stop time.
Confirm the setting by pressing the (A) knob
again. Clock hands will move to time display. The
oven stop symbol will light up.
Switch on the oven (use the oven knobs to set the
operating mode and temperature). The oven will
start operate at the set time and stop and the
selected stop time.
When the clock reaches the selected stop time,
the oven will be switched off, which will also be
indicated by an intermittent acoustic signal. The
acoustic signal can be switched off by pressing
the (A) knob; otherwise, it will switch off
automatically after 1 minute. The symbol (2) will
flash. To continue cooking, press the (A) knob
and hold it for 2 seconds, and set a new cooking
time if necessary.
SETTING THE DELAYED START
This mode allows you to specify the time when the
oven should start to operate (cooking start time) and
the time when you wish the cooking process to stop
(end time). Stop time may be delayed by a
maximum
of 12 hours relative to the current time of day;
cooking duration may be set to a maximum of 3
hours.
Check if the clock is set accurately to current
time.
Setting the start time: Select the (1) symbol by
pressing the (A) knob. Rotate the (A) knob to set
the start time and confirm it by pressing the (A)
knob. The symbol for the end of operation will
start to flash (2).
Set the stop time: Rotate the (A) knob to set the
stop time and confirm it by pressing the (A) knob.
The clock hands will turn to clock display.
Symbols (1) and (2) will be lit up.
The timer will wait for the start of the cooking
process.
Set the oven
– use the oven knobs to set the
operating mode and temperature.
The oven will start to operate at the start time,
and stop operating at the stop time.
When the clock reaches the selected stop time,
the oven will be switched off, which will also be
indicated by an intermittent acoustic signal. The
2
3
A
5
1
4
