EN
9
acoustic signal can be switched off by pressing
the (A) knob; otherwise, it will switch off
automatically after 1 minute. The symbol (2) will
flash. To continue cooking, press the (A) knob
and hold it for 2 seconds, and set a new cooking
time if necessary.
SETTING THE MINUTE MINDER
The clock can also be used as a minute minder
which will sound an alarm upon expiry of a set
amount of time. The minute minder can only be
selected when the program timer is not programmed
or in use.
Select the (3) symbol by consecutively pressing
the (A) knob until the symbol starts to flash.
Rotate the (A) knob to set the time when you wish
the minute minder to sound the alarm. The
longest possible setting is 3 hours.
Confirm the setting by pressing the (A) knob
again. Clock hands will automatically turn to lock
display and the symbol (3) will be lit up.
When the time you set runs out, an intermittent
acoustic signal will be sounded. The acoustic
signal can be switched off by pressing the (A)
knob and holding it for 2 seconds; otherwise, it
will switch off automatically after 1 minute.
DISPLAYING THE SETTING
Whenever a timer function is set, you may check it
by pressing the (A) knob. The clock hands will briefly
move to the set value and then return to display the
current time.
DELETING A SETTING
Delete the setting by pressing the (A) knob and
holding it for 2 seconds. The symbol of the deleted
function will be switched off.
MAINTENANCE AND CLEANING
OF THE COOKER
Keep to the following principles while cleaning
or maintaining the cooker:
Set all knobs in off position.
The mains circuit - breaker placed before the
appliance must be in OFF position.
Wait until the cooker is cool.
LACQUER-COATED AND PLASTIC
SURFACES
Clean the buttons / knobs and the door handle with
a soft cloth and liquid detergents intended for
cleaning smooth lacquer-coated surfaces. You may
also use the cleaners made especially for this type
o
f surfaces; in this case, follow the manufacturer’s
instructions.
WARNING
The above surfaces should never come into contact
with oven cleaning sprays, as these will permanently
damage the aluminum parts.
COOKING PLATE
Clean the cold hob after each use. Rest impurities
could be singed during next cooking.
Never use abrasive means scratching the hob. For
cleaning use only special detergents for glass
ceramic hobs (for instance Vitroclean).
Do not use abrasive detergents, spring matters or
sponge with rough side. These things can scratch
the glass ceramic hob. For cleaning use only special
detergents specified for cleaning of glass ceramic
hobs.
LIGHT IMPURITIES
Use damp sponge and after cleaning dry up the
surface. Water stains caused by boiling over can be
removed by lemon juice or vinegar.
HARD IMPURITIES
Remove them with help of concentrated cleaning
detergent which should be spread on the hob.
Remove singed pieces by a scraper and let
detergent working for a few minutes. Than clean
carefully the surface with cold water and dry out.
The cleaning detergent could be aggressive during
the next operation.
SUGAR IMPURITIES (JAM, JELLY...)
Remove immediately with a scraper in hot stage
already. In other case permanent traces can appear.
Clean with usual method after cooling down.
METAL GLISTENING SPOTS
They can appear when using aluminum utensils or
impropriate cleaning detergent. Removing such a
spots is possible with repeating of cleaning process.
Color stains
on the hob surface are usually caused
with not removed singed impurities. These stains
have no influence to the function of the glass
ceramic hob.
RUB DOWN OF DECOR
This can be caused with abrasive cleaners or long
time grazing of a pan on the hob. Dark stains can
appear on the hob.
NOTICE
Remove rest of meals from hob during cooking and
final cleaning make when finish cooking. Sugar
stains (jam, jelly,..) remove immediately by scraper.
In other case permanent traces can appear.
OVEN
Clean the oven walls with a damp sponge with
detergent. If there are baked rests on the wall, use a
special detergent for enamel. Carefully dry up the
oven after cleaning.
Clean the oven only when cold. Never use abrasive
means scratching the enameled surface.
