EN
11
CLAIMS
In case of any defects of the appliance during
warranty period, do not attempt to repair it by
yourself. Make a claim at an authorized dealer or at
place of purchase and ensure that you are in
possession of the Certificate of warranty. Beware
that in the absence of duly completed Certificate of
warranty your claim is null and void.
NOTE
The appliance will be delivered to you with the
appropriate protective wrapping. This packaging
material is valuable and can be recycled if such
facilities are available in your locality.
METHODS OF UTILISATION AND
LIQUIDATION OF PACKAGES
The collection of packages at collecting places in
your locality guarantees their recycling.
Corrugated board, wrapping paper
- sale to the collecting places
- in garbage containers for collection paper
Wooden parts
- other utilization
- to with the municipality destined place for refuse
dumping
Wrapping foil and bags
- in garbage containers for plastic parts
LIQUIDATION OF AN APPLIANCE
FOLLOWING ITS LIFE EXPIRATION
The appliance comprises valuable materials, which
ought to be newly utilized. Dispose the appliance on
the collecting place or on with the municipality
destined place for refuse dumping.
This appliance is marked in accordance with the
Directive 2012/19/EU on waste electrical and
electronic equipment - WEEE.
After expire of life time give the appliance to the
collecting place for used electric and electronic
equipment.
INSTALLATION
INSTRUCTIONS AND SETTINGS
CONNECTION OF THE COOKER TO THE
ELECTRIC MAINS
A device disconnecting the appliance from mains,
whose off contacts of all poles are in a minimum
distance of 3 mm, must be built in the stable
electrical energy distribution before the appliance.
There is the recommended three-phase connection
of the cooker with the aid of an H05RR-1.5 type
connecting cord (previously CGLG 5Cx1.5) whose
ends are to be adjusted to figure 4.
It is necessary to brace the conductor ends with
pressed terminals against fraying.
For single-phase connection use an H05RR-F3G-4
(previously GGLG3Cx4) type connecting cord and
brace the conductor ends to figure 5.
After bracing the conductor ends beneath the
terminal board screw heads place a cord in the
terminal board and secure it by a clip against tearing
(figure 5). Eventually close the terminal board cover.
Solely an authorised, skilled person may install the
cooker. The authorised person is obliged to set the
cooker cooking plate in horizontal position, to
connect it to the mains and to check up on its duty.
Installation of the cooker must be confirmed in the
certificate of warranty. The electric cooker is a heat
consumer, the installation and location of which
must correspond with local standards in force.
For the cooker connection we advise using a
connecting cable:
- Cu 3 x 4 mm
2
as minimum - for single-phase
connection (circuit breaker 35
– 38 A to the type)
- Cu 5 x 1.5 mm
2
as minimum - for three-phase
connection (circuit breaker 3x16A)
IMPORTANT NOTICE
At any electric cooker disassembly or assembly
besides its current use it is necessary to disconnect
the appliance from mains and to keep it out of
service.
In installation of the appliance, it is necessary to
do in the light of its duty chiefly the following:
Verification
of
the
correctness
of
mains
connection,
A check on the duty of heaters, control and
governing elements,
Presentation to the client of all functions of the
appliance and familiarisation with its service and
maintenance.
NOTICE
The electric cooker is a Class I appliance according
to the electric current injury prevention degree and
must be interconnected with the mains protective
conductor.
