3. Display illumination
Choose between three levels of display light intensity. Choose the
brh
setting. Touch the
or
key to select the desired level, and confirm.
Use the value setting keys to increase or decrease light intensity.
4. Display unit – night mode
This function will automatically dim the display (switch from high to low
display illumination level) during night time (8:00 p.m. to 6:00 a.m.) Choose
the
nGht
setting. Touch the
or
key to select the desired night-time
display illumination, and confirm.
5. Standby
This function automatically switches the clock display on or off. Select
the
hidE
setting. Touch the
or
key to select on or off, and confirm.
6. Adaptive function
This function allows adjusting the set cooking time. The function is
activated as a factory default, but it can also be deactivated.
When the function is activated, the most recent cooking program duration
settings are displayed. Values from the most recent cooking session will
be used.
AdPt
will appear on the display unit. To deactivate the function, touch
the
or
key to select off. Follow the same procedure to re-activate
the function. Select on on the display unit.
7. Factory settings
This function allows resetting the appliance to factory settings.
FAct
will
appear on the display unit. Touch the
or
key to select rES to
choose the factory settings, and confirm by pressing and holding the
start/stop
key. Hold the key until all lit dashes disappear.
WARNING!
After a power outage or after the appliance is switched off, additional function settings
will remain stored for no more than a few minutes. Then, all settings, except for the acoustic
signal volume and display dimmer will be reset to factory defaults.
19
