Wire guides
In case of wire guides, always insert the wire
(grid) rack and the baking sheets into the slot
between the upper and lower part of each guide
level.
Fixed pull-out guides
Pull-out guides may be fitted for the 2nd and
4th level.
IN case of fixed pull-out guides, place the rack
or baking sheet onto the guide. You can place
the wire rack directly onto a baking sheet
(shallow or deep all-purpose baking sheet) and
place both onto the same guide; in this case,
the baking sheet acts as a drip tray.
Click-on pull-out guides
(depending on the model)
Click-on pull-out guides can be attached in any
space between two wire guide levels.
Place the guides symmetrically onto the wire
guides on the left and right side of the oven
cavity. First, hook the upper clip of the guide
onto the wire of the wire guide. Then, press the
lower clip into the right position until you hear
a click.
NOTE: The guides can be attached to any
height between two levels of wire guides.
INFORMATION!
The click-on pull-out guides cannot be mounted onto guides with fixed double-level partial
extension. They can, however, be mounted on to single-level partially extendible guides, to levels
3–4 and 4–5.
Make sure the pull-out guide is correctly rotated and that it extends outwards, i.e. out from the
oven.
11
