9
Turn hotplates on
After turning the hob on, within the next 20 seconds start one of the hotplates.
•
Select the desired hotplate, its display shows
and the corresponding decimal dot
changes from flashing fixed.
•
Set the power level 1-9 by touching the slider.
−
At the first touch, the level is set according to the part of the slider that you touch.
Upon the slider, the control LEDs light up, according to the level set.
−
By sliding along the slider, the power level setting is changed. By sliding to the
right, the level increasing, while sliding to the left decreases the level. When you
move your finger away from the slider, the cooking field starts to operate at the
level set.
Changing hotplate power settings
•
Select the desired hotplate.
•
Touch or slide along the slider to change power setting.
•
When you remove the finger from the slider, the hotplate starts to operate at selected
power.
Automatic fast heating
This function preheats the hotplate on maximum power in order to bring it rapidly up to the
required temperature. After a given time interval, the power level returns spontaneously to
the established setting.
It may be switched on in any of the hotplates for all power settings except for setting 9
where power is set at maximum all the time.
Activation
Automatic cooking mode is activated on any idle hotplate.
•
Select the desired hotplate, the display shows
•
First touch of the slider must be to the extreme right, followed by a new pressure level 9.
The respective display shows
, automatic cooking mode is on.
•
Until the decimal dot is on, it is possible setting the desired power level (8...1) further by
touching the slider.
•
Display alternate
and the set cooking level.
Once the time from the chart below expires, the function is switched off and
disappears.
You can also switch the automatic cooking mode off anytime by bringing power
setting to
.
Power setting
1
2
3
4
5
6
7
8
9
Maximum power
cooking time (min.)
1
3
4,8
6,5
8,5
2,5
3,5
4,5
0,2
Key Lock
By activating the key lock you can stop the operation of the appliance and the use of
hotplates.
Activation / Deactivation
•
Touch
for approximately 3 seconds.
•
The lock/unlock is confirmed by a beep
•
The signal LED above the sensor is turned on/off.
−
Safety lock can be activated only if the cooking hob is turned on.
−
Safety lock prevents the activation of all sensors, except for
and
−
If the hob is switched off when the lock function is active, it remains in memory
until a new turns hob on.
−
When set timers end their time, alarms can be switched off by activating any key
without need for unlocking the control.
Child Lock
By activating the child lock you can stop the operation of the appliance and the use of
hotplates, protecting the children from accidental start and eventual injury.
The activation of the child lock is only possible:
•
if the control is switched on
•
if hotplate is active
•
if no timer is selected.
