10
Activation
•
Touch
•
Within 10 sec touch the front right hotplate and
simultaneously followed by pressing
the front right hotplate again.
•
All displays show
for locked.
Deactivation
•
Touch
•
Within 10 sec touch the front right hotplate and
simultaneously followed by pressing
again.
•
The child lock is cancelled.
Warming function
This function is used to keep cooked food warm. The selected cooking zone is operated
with a low power.
This function can be activated by touching between cooking level 0 and 1. Cooking zone
display shows
Timer
Use of timer facilitates cooking by setting the time of hotplate operation.
Operation time can be set for each hotplate separately.
Activation
•
Select the desired hotplate to be timer controlled
(cooking level
≠
)
.
•
The respective decimal dot lights and timer display shows
•
Touch the timer display, at the beside of timer’s display, the light of the hotplate of which
timer is being set is flashing.
•
First the regulation of the second digital number has place and then the one of the first
digital number (the active number is displayed by the symbol
when the regulation
starts).
•
By sliding along the entire slider, the exact tie can be set. By sliding to the right, the time
increases, while sliding to the left decreases the time setting by one minute steps.
•
When you remove the finger, after a few seconds the timer starts the countdown.
Indicator displays actual power setting, and the dot beside of timer’s display indicates
that timer is on.
Changing pre-set cooking time
Cooking time can be changed anytime during the operation.
•
Select desired hotplate, residual time is displayed on timer’s display.
•
Touch the Timer display.
•
Within 10 sec slide along the entire slider to set the new cooking time.
If time is not modified in 10 seconds since pressing the slider, timer goes to zero and then
turns off automatically.
Checking remaining cooking time
•
Last set timer is always displayed.
•
Select hotplate. The residual time of selected hotplate will be displayed on timer’.
Deactivation
When pre-set time elapses, a beep signals the end, and the hotplate is switched off.
Switch off the alarm by pressing the timer display or it switches off automatically after 2
minutes.
If you want to switch the timer prior pre-set time:
•
Select the desired hotplate.
•
Touch the timer display.
•
Touch on the far left side of the slider to deactivate the timer and the time set. The time
setting can also be reset by sliding along the entire slider.
•
The illuminated point on the left part of the display is turned off and the timer is
deactivated.
Alarm
Activation
•
Touch
•
Touch the timer display.
•
Slide on the slider to set desired time.
