11
Deactivation
When the pre-set time expires a beep is heard which you can either turn off by touching
any sensor or leave it to turn off automatically after 2 minutes.
If you want to switch the timer off prior expiry of pre-set time
•
Touch the timer display.
•
Touch on the slider until
. Alarm function is off.
Turn hotplates off
•
Select the desired hotplate (cooking level
≠
)
•
Touch and slide along the slider until level
•
After 10 seconds the hotplate is turned off.
Fast deactivation
•
Select the desired hotplate (cooking level
≠
)
•
Touch the slider at the start to bring the power setting to
•
Short beep confirms the OFF position.
•
After 5 seconds the hotplate is turned off.
•
If the hotplate was timed, the timer is also turned off.
Turn hob off
•
The hob is turned off by pressing
Remaining heat
indicator
When an active hotplate is turned off, or when the entire hob is turned off, some display
can show
, as a signal that a particular »hotplate is still hot«. Display time is calculated
in relation to the used heating power and the period the hotplate was active prior switching
off. Even when warning signal
disappears, hotplate may still be hot in certain cases
(power failure, leaving any temperature sensitive objects on the hotplate).
BE CAREFUL!
Danger of burns!
Safety switch off
For improved safety, your cooking hob is fitted with a device that limits the duration of the
cooking hob operation for each hotplate respectively. The duration of operation is
measured from the last change made to the power level settings for a particular hotplate.
If the power level is not changed for a while, the hotplate will automatically be turned off
after a certain period of time which depends on the power level (see table below).
Power setting
1
2
3
4
5
6
7
8
9
Hours lapse prior safety
switch off
6
6
5
5
4
1.5 1.5 1.5 1.5
SPECIAL WARNINGS AND FAULT REPORTING
•
During the warranty period, only a service center authorized by the manufacturer may carry out any repairs.
•
Before making any repairs, make sure the appliance is disconnected from the power mains either by removing the fuse
or by disconnecting the power plug from the wall outlet.
•
Unauthorized tampering with and repairs of the kitchen range (cooking hob) can result in electric shock or short circuit;
hence, do not attempt to perform any repairs by yourselves. Leave such tasks to an expert or an authorized service unit.
•
In case of minor faults or problems with the appliance operation, check the following instructions to see whether you can
eliminate the causes by yourselves.
•
Elimination of any errors or warranty claims that resulted from improper connection or use of the appliance is not covered
by our warranty. In such cases, the costs of repair are borne by the user.
ERROR CODE
ERROR DESCRIPTION
REMEDY
/ ER03
+ suono
continuo
Permanent use of keys. Hob control
cuts off after 10 sec.
Cleaning of the control surface. If error persists, call
after-sales service for technical assistance.
ER21
Hob control cuts off due to
overheating to avoid damage to
electronics.
Allow cavity to cool down. Check heat sealing-off of
hob control. If error persists, call after-sales service
for technical assistance.
U400
Hob control cuts off after 1 sec.
releasing a permanent tone.
Connect to correct main voltage. If error persists,
call after-sales service for technical assistance.
ER20 - ER40
ER22 - ER36
ER47
Call after-sales service for technical assistance.
