7
▪
Touch the glass (smooth touching)
Installation diagram
Connection must be carried out by means of harmonized cables as H05V2V2-F (90°C), or
with equal or better features.
LIVE
L
BROWN
EARTH
GREEN / YELLOW
NEUTRAL
N
BLUE
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
TECNICAL INFORMATION
731579/01
P
TOT
6000 W
Supply voltage
220-240 V~
Supply frequency
50/60 Hz
Ø 14 cm / 1,2 kW
Ø 18 cm / 1,8 kW
Before using the
appliance for the first
time
•
Remove any protective wrapping and stickers.
•
Clean the hob with a damp cloth only and then wipe dry.
•
Make sure the cooking zones and pan bottom are clean and dry, and that sufficient heat
transmission is enabled between them, in order to prevent any damage to the heating
surface.
•
Do not place a damp pan or a steam-covered lid on the cooking zones, as moisture is
detrimental to them.
•
Do not leave a hot pan to cool down on the cooking zones, because moisture will be
generated under it, causing corrosion.
Cookware
•
Use p
ans with a thick base which is very slightly concave when cold. When heated, the base
flattens to rest evenly on the hob, optimising the conduction of the heat.
•
Transmission of heat is best when the pan bottom and the cooking zone are of the same
diameter, and the pan is placed on the centre of the cooking zone.
•
When using a tempered glass (Pyrex), porcelain, pressure, special or unconventional
cookware, please follow the cookware manufacturer’s instructions.
•
Make sure there is always enough water, either in a pressure cooker or in any other
cookware, as using an empty pan on the cooking hob will result in overheating which will
damage both the pan and the cooking zone.
•
Do not use clay cookware, because it may leave scratches on the glass-ceramic hob.