Installation procedure
•
Worktop must be placed absolutely horizontal.
•
Suitably protect the edges of the cut aperture.
•
Screw the attached fixing elements 4 with attached screws
4 on the right and the left panel of the hob to the already
prepared hole in the opening.
•
Connect the cooking hob to the mains power supply (see
instructions for the connection of the cooking hob to mains
power supply).
•
Insert the hob into the cut aperture.
•
Press the hob firmly towards the worktop from above.
Installation of severa
glass-ceramic hobs
When installing several glassceramic hobs it is necessary
to separate them with intermediary short strip
(to be purchased separately - 144079).
Connecting the hob to the mains
12
•
Connections may be carried out by a qualified technician only.
The earthing protection must comply with the standing
regulations.
•
Connection brackets are accessible when the bracket lid is
opened.
•
Prior any attempted connection check that the voltage
indicated on the rating plate is in line with your home power
supply.
•
The rating plate is located underneath the appliance.
