Fitting the hob
Caution
•
To avoid any possible hazard, the appliance may be installed by qualified personnel only.
•
Panels and furniture lining of the kitchen cabinet receiving the hob must be treated with temperature
resistant adhesives (100°C), otherwise they might be discoloured or deformed because of inadequate
temperature resistance.
•
The cooking hob is intended for building into the worktop above the kitchen element of 600 mm width
or more.
•
After the installation of built-in hob make sure that there is free access to the two fixing elements in
front.
•
Suspended kitchen elements above the cooktop must be installed at such distance to provide enough
room for comfortable working process.
•
The distance between the worktop and the hood must be at least such as indicated in the instructions
for installation of the kitchen hood, but in no case it may be less than 650 mm.
•
The smallest distance between the edge of the appliance and the adjacent high kitchen cabinet is
40mm.
•
The use of hard wood decorative borders around the worktop behind the appliance is allowed, in case
the minimum distance remains as indicated on the installation illustrations.
•
Minimum distance between the built-in cooktop and rear wall is indicated at the illustration for the
installation of the built-in cooktop.
Built-in induction hob
opening dimensions
•
The appliance may be installed in any worktop with a
thickness from 30 mm to 50mm.
•
Bottom kitchen element must not have a drawer. It must be
fitted with a horizontal plate 100mm away from the worktop
bottom surface. Space between the plate and the hob must
be empty and no objects may be stored or kept there.
•
Rear side of the kitchen element must also have a 100mm
high opening along the entire width of the element, and the
front part must have an opening of no less than 6 mm.
11
