8
SWITCHING OFF OF
COOKING ZONE
•
Activate the corresponding cooking zone.
•
The cooking zone is switched off with synchronous pressing of
sensors D (+) and C (-) or witch pressing of sensor C (-) up to
achieving of „0“ capacity level.
•
The symbol "H" will light on the display of corresponding zone
after switching off of cooking zone, where this symbol is calling
your attention to the fact, that the zone is hot and the remaining
heat can be used.
INDICATOR OF
REMAINING HEAT
The symbol "H" will light on the display of corresponding zone
immediately after switching off of cooking zone or whole
hotplate. This means, that the cooking zone is hot and it has a
temperature over 60°C. The symbol vanishes after cooling down
of hotplate.
REMARK
When the symbol „H“ appears on the display after
connecting of hotplate to the main (for instance after
blackout during cooking or at initial connecting to the
main), this means, that the hotplate was disconnected from
main in hot condition.
This is not an error, the symbol „H“ vanishes after a time
period, preset with the producer.
FUNCTION FOR KEEPING
THE FOOD IN WARM
STATE
The food is kept in warm state with low capacity level.
Setting up of function:
•
Set the cooking zone to capacity level 1 and press the sensor
„-“.
•
The display shows the sign „u“
LOCKING OF HOTPLATE
CONTROL
For locking of hotplate set up regime (for preventing of
unintended setting up modification during operation), press the
sensor "A" (key) for at least 2 seconds. The signal light "F" will
be on. The switching off of hotplate (with pressing of sensor "B"
- main switch) or the switching off locking of control (with
pressing of sensor "A" - key) are functional only at locked
hotplate control. We can once more control all functions of
hotplate after switching off of hotplate control locking (the
indication diode of u sensor "A" is go out).
REMARK:
The locking of hotplate control is possible in switched on
appliance only.
CHILD LOCK
The child lock serves for disabling of use of the appliance.
•
The child lock can be activated only, when all cooking zone
have the "0" capacity level.
METHOD
•
Switch on the hotplate with pressing of sensor „B“.
•
Blinking decimal points are shown on the displays.
•
Up to 3 seconds press simultaneously the sensors „+“ and „-“
and thereafter the sensor „+“.
•
The symbol "L" appears for short time on the displays and the
hotplate goes off.
•
At attempt for switching on the hotplate the displays go on
showing the symbol "L"
