Gorenje Plus GIS68XC, Instructions For Use Manual

Page: 15 / 36

3866
7
2
Switching off the boost function
The boost function is switched on, and the display
indicates ‘P’.
1. Touch the slide control sensor at any position. The
display shows the selected power setting, the boost
function is switched off . Or:
2. Touch the leftmost end of the slide control sensor. The
display shows setting 0 , and the hotplate is switched off .
• Two hotplates behind each other
- Two hotplates positioned behind each other infl uence
each other. The power is automatically distributed
when these hotplates are used at the same time. This
does not have any consequences up to setting 9.
Selecting the Boost setting for one of the hotplates,
however, automatically switches the other hotplate to
a lower setting.
- If one of the hotplates is set to boost and you want to
set the other zone to setting 9 or Boost, the hotplate
that is set to boost will automatically be switched to a
lower setting.
- Two hotplates that are beside each other do not
infl uence each other. You can set both hotplates to
Boost.
Switching off a particular hotplate
1. The hotplate is switched on. The display shows power
setting between 1 and 9, or P .
To switch off the hotplate slide your fi nger over the slide
control from right to left until the display shows setting
0 .
Or:
2. Select setting 0 by touching the slide control sensor at
the foremost left point.
You will hear a bleep and the display will show
0.
If all
hotplates are set to 0. , the hob automatically switches
to stand-by mode (see also ‘Stand-by mode’).
Switching off all of the hotplates at the same time
The hob is in stand-by mode, or one or more of the
hotplates are active.
1. Briefl y touch the On/Off button
to switch off all of
the hotplates at the same time.
You will hear a single bleep. No lights are illuminated.
The hotplate is now switched off .
Note
You can switch off the hob if the (child) lock is set
or the Stop/Go mode is active.
Switching off the hob
15