Gorenje Plus GIS68XC, Instructions For Use Manual

Page: 13 / 36

3866
7
2
The power has 9 settings. There is also a ‘boost’ setting,
which is indicated by the letter
P in the display.
1. Put a pan on a hotplate.
2 Touch the On/Off button
.
You will hear a short bleep and the display for each
hotplate will show
0.
If no further action is taken within
the following 10 seconds, the hotplate will automatically
switch off .
3. Slide your fi nger from left to right over the slide control
and select the desired hotplate setting. The hob will
automatically start in the chosen setting (if it detects a
pan with adequate diameter).
Touching the slide control more to the right will
result in higher power setting (and touching it
more towards the left will result in reduced power
setting).
If the hob does not detect a ferrous pan after the cooking
power has been set, the pan detection symbol
and the
selected power setting will fl ash alternately on the display,
while the hob remains cold. If an adequate ferrous pan
is not placed on the hotplate within 1 minute from the
commencement of fl ashing, the hotplate will automatically
switch off .
A hotplate that has been used intensively will retain heat
for several minutes after it has been switched off . A letter
H appears in the display as long as the relevant hotplate
is hot.
Switching on the hob
and setting the power
Detecting the pan
Remaining heat
indicator
13
OPERATION