2
9/18 - Rev. U
G-FORCE® OPERATIONAL GUIDELINES
All operators should read the G-Force® Installation and Operation Manual before
operating the unit. Please follow the instructions contained in this manual for your
safety and the optimum trouble-free operation of your G-Force®.
Read & follow all
instruction & warning
information on or attached
to the G-Force®.
Check Wire Rope for
improper seating, twisting,
kinking, wear or defects
before operating.
Center G-Force® over
the load before lifting
a load. Do not end
or side load.
Avoid swinging of load
or load hook when
traveling with the
G-Force®.
Check the coil cord for
improper seating, twisting,
kinking, wear or defects
before operating.
The operator’s hand should not
leave the handle grip at any
time the G-Force® is in use
(excluding Float Mode).
Float Mode - Press the G-Force®
logo button with only the load weight
handing from the unit. Applying
additional force will cause unit to drift.
The wire rope should never be
more than 15° out of vertical
while the G-Force® is in use. The
G360™ must be level at all times.
Do not impact the G-Force®
into end stops repeatedly or at
a speed faster than a normal
walking pace.
Maximum Trolley Saddle for the
G-Force® with standard in-line slide
handle is 14’. See above drawing
for Trolley Saddle defi nition.
The maximum available wire
rope travel for the G-Force® is
11’. For H5 duty cycle the
maximum working stroke is 8’.
Questions about G-Force®?
Call your local Gorbel®
distributor or Gorbel® Customer
Service at (800) 821-0086.
G-Force®
Installation &
Operation
Manual
1
9
10
11
12
8
7
6
5
4
3
2
What is
Trolley
Saddle?
The distance
from bottom
of wheels to
fl oor.
Maximum
Trolley
Saddle is
14’.
11’
?
