6
Desktop Transceiver SFX-TAP4_2/C, V0.1, Technical Description
1.2 Scope of Delivery
•
SFX-TAP2/C or SFX-TAP4/C
•
Power supply 5.0 V / 2.4 A
•
SFX Cable
•
this manual
2 Technical Data
2.1 General Information
The Desktop Transceiver SFX-TAP4/C (SFX-TAP2/C) forms together with the Host Controller a
Boundary Test System that allows versatile kind of connections the Unit-Under-Test (UUTs).
The following device properties allow maximum flexibility of the interface to the UUT:
•
voltage-programmable Testbus interface in the range of 1.8V-4.5V, inputs (TDI
signals) in the range of 0V-3.0V
•
3-array impedance programming of the Testbus interface
•
ADYCS™ (Active Delay Compensation)
•
voltage-programmable 32 Bit Parallel Interface Port (PIP) in the range of 1.8V- 4.5V
•
relay output (5V) or a logic signal at each TAP(2 or 4) on connector PwrCtrl for UUT
power control
•
2 analog I/O with 10 Bit resolution, (AD and DA converter on 2 pins of the AUX
connector)
•
3 digital I/O on AUX connector
•
SFX/LS interface
•
Trigger lines (2 output, 1 input) on AUX and on TAP/PIP connector
•
SCP-TAP on SFX-TAP2/C
2.2 Dimensions
The Desktop Transceiver SFX-TAP4/C (SFX-TAP2/C) has following dimensions:
(L x W x H) 152 mm x 102.5 x 22 mm
2.3 Characteristics
Symbol
Name
Min.
Typical
Max.
Unit
VDD
Operating Voltage
4.75
5.0
5.25
V
T
stg
Storage temperature
-40
125
°C
T
a
Operating temperature
0
35
°C
Relative storage humidity, not
condensing
10
90
%
Relative operating humidity,
not condensing
20
85
%
Summary of Contents for SFX-TAP2/C
Page 4: ......
