background image

•  All the information in this document is the property of GoodWe. No part of this document could 

be reproduced in any way for business use. Internal use is allowed.

•  GoodWe  makes  no  representations  or  warranties  express  or  implied,  with  respect  to  this 

document or any of the equipment and/or software it may describe, including (with no limitation) 
any implied warranties of utility, merchantability, or fitness for any particular purpose. All such 
representations  or  warranties  are  expressly  disclaimed.  Neither  GoodWe  nor  its  distributors 
or  dealers  shall  be  liable  for  any  indirect,  incidental,  or  consequential  damages  under  any 
circumstances.

•  The exclusion of implied warranties may not apply in all cases under some statutes, and thus the 

above exclusion may not apply. 

•  Specifications are subject to change without notice. Every effort has been made to make this 

document  complete,  accurate,  and  up-to-date.  However,  GoodWe  may  need  to  make  some 
improvements  under  certain  circumstances  without  advance  notice.  GoodWe  shall  not  be 
responsible for any loss caused by this document including, but not limited to omissions errors, 
typographical errors, arithmetical errors, or listing errors in this document.

Disclaimer

Version

Date

Record

V1.0

2021-3-15

First Release

Lmitation of Liability

GOODWE shall not be liable for any consequences like battery damage or property loss under the 

following circumstances:
•  Modify, alter, or replace parts of the battery system without authorization from GOODWE.
•  Anyone except technicians from GOODWE changes or erases the serial number.
•  Establish a battery system that does not meet the criteria, safety regulations, and other related 

requirements.

•  Non-observance to the User Manual.
•  Improper use or misuse of the battery.
•  Inadequate ventilation.
•  The maintenance routine does not follow accepted standards.
•  Force Majeure like earthquakes, storms, thunders, overvoltage, or fire hazards, etc.
•  Any external factors.

Summary of Contents for Lynx Home LX S10-H
































Reviews: