manualshive.com logo in svg

Goodwe LX F12.8-30, User Manual, Page: 31 / 35

Share
Download
Goodwe LX F12.8-30 User Manual Download Page 31

User Manual V1.0-2022-11-01

27

07  Equipment Commissioning

Button 

Indicator

SOC Indicator

Alarm

Solutions

Red light 

blink 2 times

Battery 

Overvoltage

Restart the battery. Contact the After Sale 

Service if the problem could not be solved.

Battery 

Undervoltage

Long press the button for 5 seconds to start the 

battery under charging conditions. Contact the 

After Sale Service if the problem could not be 

solved.

Overcurrent 

Charging

Restart the battery. Contact the After Sale 

Service if the problem could not be solved.

Overcurrent 

Discharging

Restart the battery. Contact the After Sale 

Service if the problem could not be solved.

Temperature 

Difference 

Exception

Power off and wait for 2 hours. Contact the 

After Sale Service if the problem could not be 

solved.

High 

Temperature

Power off and wait for 2 hours. Contact the 

After Sale Service if the problem could not be 

solved.

Low 

Temperature

Power off and wait for 2 hours. Contact the 

After Sale Service if the problem could not be 

solved.

Interlock 

Failure

Contact the After Sale Service if the problem 

could not be solved.

Others

Contact the After Sale Service.

7.4.2  Alarming Status

Button 

Indicator

SOC Indicator

Fault

Solutions

Steady red

Battery 

Overvoltage

Restart the battery. Contact the After 

Sale Service if the problem could not 

be solved.

Battery 

Undervoltage

Long press the button for 5 seconds 

to start the battery under charging 

conditions. Contact the After Sale 

Service if the problem could not be 

solved.

Overcurrent 

Charging

Restart the battery. Contact the After 

Sale Service if the problem could not 

be solved.

Overcurrent 

Discharging

Restart the battery. Contact the After 

Sale Service if the problem could not 

be solved.

Temperature 

Difference 

Exception

Power off and wait for 2 hours. Contact 

the After Sale Service if the problem 

could not be solved.

High Temperature

Power off and wait for 2 hours. Contact 

the After Sale Service if the problem 

could not be solved.

7.4.3  Faulty Status

Summary of Contents for LX F12.8-30




































Reviews:

No comments