11
number keys (
0 to 9
) on the remote control. Press
OK
to confirm
your selection, or
Press the
6.
OK
button to skip this stage. The PIN can be set later.
The ‘Tuning’ function will be selected, showing the number of TV and
7.
Radio channels currently stored in the digital box. For a first time
install, these will both be 0.
8. Press the
OK
Button. The system will scan for TV and Radio channels
and updates the number of channels found. During this time a
progress bar advances until complete (100%). This step takes about
8 min.
When scanning has finished, press the
9.
OK
button. The screen
displays ‘Installation complete’.
Press the
10.
OK
Button to begin watching the first TV channel stored. If
there has not been a button press for 15 seconds, the channel will be
displayed automatically.
If multiple TV regions are available in your area, you will be prompted to
choose a region during the installation process.
Getting Started
02
5
DON’T FORGET!
Remember to make a note of your PIN for later
use. The default PIN setting is 0000, if you choose to skip the ‘Set
PIN’ stage, this will remain the Parental PIN number until changed.
If you change your PIN, write it here: .......................
