4. Use the SELECT button to select ‘Yes’ and press the centre of the SELECT button to
factory reset the unit.
5 Troubleshooting
Problem
What to do
No Power
Check the mains plug is connected to the
wall socket. Switch the wall socket on.
Press the STANDBY button to wake from
Standby mode.
No sound
The volume level is too low. Increase using
the volume control.
The external audio source volume is too
low, increase the volume level.
The sound is distorted
Reduce the Micro System volume level
using the volume control.
The external audio source volume is too
high, decrease the volume level.
Unable to play a CD
Check there is a disc present in the CD
drawer.
Remove and re-insert the CD with the label
side facing upwards.
Clean the disc, it may be dirty. If
scratched, try another disc.
Static interference/Burbling sound when
listening to the radio
This is caused by poor reception. Re-
locate the antenna or if that fails try moving
the Micro System to a different location.
Bluetooth sound is interrupted or distorted
The unit is close to a device that generates
electromagnetic radiation. Re-locate the
Micro System away from other devices.
Obstacle(s) between the unit and the
Bluetooth audio source device. Remove
the obstacle.
