Line In Operation
4.24 Line In Mode
It is possible to connect an external audio source like an MP3 player using a 3.5mm audio
cable (not supplied).
1. Connect one end of the cable to the AUDIO devices headphone output and the other
end to the LINE IN socket on the front of the Micro System.
2. Press the MODE button until you reach the LINE IN MODE option.
3. Adjust the volume to your desired level.
The volume output is affected by the volume level on the source EG: MP3 player so make
sure that is set to about 70-80% (not too loud to avoid distortion).
4. Use your source device to control the playback of your music.
Headphone Socket
4.25 Using Headphones / Earphones
You will require headphones or earphones fitted with a 3.5mm diameter stereo plug. The
headphone socket is located on the front panel of the unit.
Always turn down the volume before connecting headphones or earphones. Slowly raise
the volume until you reach a comfortable listening level.
Long term exposure to loud music may cause permanent hearing damage.
Factory Reset
4.26 Factory Reset
There may be times when you need to reset the unit back to its original factory setting.
1. Press the MENU button.
2. Select the <System Settings> menu and press the centre of the SELECT button to
open the menu.
3. Select <Factory Reset> and press the centre of the SELECT button.
