8. After completion of preheating, turn the burners to
low position for best cooking results.
02 Manual lighting instructions
1. If the appliance has a lid/hood, open it.
2. Ensure all knobs are in the OFF position. Open the gas
control valve on the gas bottle or regulator.
3. Insert lit match through the match-lighting hole on
either left or right side of the appliance.
4. Push and turn the control knob anti-clockwise to the
high position.
5. After successful lighting, light the other burners
as desired.
6. Before cooking for the firsttime and after turning
on, the control should be set at the high position for
3-5 minutes in order to preheat the appliance. This
process should be done before every cooking session.
7. After completion of preheating, turn the burners to
their low position for the best cooking results.
After each use
01 End of cooking session
•
After each cooking session, turn the appliance
burners to the “high” position and burn for 5 minutes.
This procedure will burn off cooking residue, thus
making cleaning easier.
•
IMPORTANT: Keep the hood/lid (if present) open
during the cleaning.
•
Ensure the appliance and its components are
sufficiently cool before cleaning.
•
Check and tighten all screws & bolts, etc on
the appliance.
02 Turning off your appliance
•
When you have finished using your appliance, turn
all the control valves fully clockwise to the “OFF”
position, then switch off the gas at the bottle. Wait
until the appliance is sufficiently cool before closing
the hood/lid.
•
Ensure the appliance and its components are
sufficiently cool before cleaning or moving.
32
Use
32
WINM12695 PID 173658_s1_s1 3663602431220-Good Home IM R.indd 32
19/11/2018 16:57
