Goobay®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
REV2021-06-11
V2.0cl
58260
USB 3.0 card reader
1 Safety instructions
The user manual is part of the product and contains important information for
correct use.
•
Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product.
•
Keep this user manual.
•
Do not open the housing.
•
Do not modify product and accessories.
•
Do not short-circuit connectors and circuits.
•
Only use the product, product parts and accessories if they are in per
-
fect condition.
•
In case of questions, defects, mechanical damage, malfunctions and ot
-
her problems that cannot be solved by the accompanying documentati
-
on, contact the dealer or manufacturer.
Not meant for children. The product is not a toy!
•
Secure packaging, small parts and insulation against accidental use.
•
Avoid extreme loads such as heat and cold, wetness and direct sunlight,
microwaves as well as vibrations and mechanical pressure.
2
Description and function
2.1 Product
The USB 3.0 card reader is used to read MicroSD and SD memory card for
-
mats.
○ Fast data transfer thanks to SuperSpeed USB 3.0 connection
○ Read speed up to 5.0 Gbit/s
○ Reads and writes up to 2 memory cards simultaneously
○ LED indicates the operating status of the card reader
○ Supports plug & play
2.2
Scope of delivery
Card reader USB 3.0, User Manual
2.3
Operating Elements
1
Operating LED
2
MicroSD socket
3
SD socket
4
USB 3.0 connector, type A
5
Protective cover for USB port
2.4
Specifications
Article number
58260
Connections
USB 3.0 male, type A
SD socket
MicroSD socket
Input voltage
5,0 V
Data transmission
rate
USB 3.0: 5.0 Gbit/s
Supports operating
systems
Windows XP, 7, 8, 8.1, 10 & Mac OS 10.6 or higher
Compatible with
SDXC, SDHC, MicroSD and
SD memory cards
Dimensions
71 x 21.3 x 9.7
Weight
11
3 Intended use
We do not permit using the device in other ways like described in
chapter "Description and Function" or in the "Safety Instructions".
Use the product only in dry interior rooms. Not attending to these
regulations and safety instructions might cause fatal accidents, injuries, and
damages to persons and property.
4
Preparation
1.
Check the scope of delivery for completeness and integrity.
2.
Compare the specifications of all used devices and ensure compatibility.
5
Connection and operation
1.
Plug the card reader into a USB socket on your PC or notebook.
Wait until the device is detected.
2.
Insert a suitable memory card into the card reader.
Make sure that the device is correctly seated. The computer automati-
cally recognizes the device. No driver installation is required.
3. Do not remove the card reader until there is no more memory card in it.
Otherwise, data may be lost.
6
Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE!
Material damage
•
Only use a dry and soft cloth for cleaning.
•
Do not use detergents or chemicals.
•
Store the product out the reach of children and in a dry and dust-protec
-
ted ambience when not in use.
•
Store cool and dry.
•
Keep and use the original packaging for transport.
7
Disposal instructions
7.1 Product
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its compo
-
nents must be recycled or disposed apart from each other. Otherwise
contaminative and hazardous substances can damage the health and
pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic
devices to the producer, the dealer, or public collecting points at the end of the
devices lifetime for free. Particulars are regulated in national right. The symbol
on the product, in the user manual, or at the packaging alludes to these terms.
With this kind of waste separation, application, and waste disposal of used
devices you achieve an important share to environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at the suitable collection
points – paper belongs in paper bins, plastics belong in yellow sacks
and glass belongs in used glass bins.
DE4535302615620
8 EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic
GmbH ensures, that the product is conformed to the basic European
standards and directives.
9 Symbols used
For indoor use only
IEC 60417- 5957
Direct current
IEC 60417- 5031
Recycling
ISO 7001 - PI PF
066
- 2 -
Subject to change without notice.
User Manual
EN
