-
23-
3.
Check your phone and device in the same domain. Then open the App, enter the
“IP address”
and
click
button. Users can also click
“SCAN”
to choose device.
4.
After adding the device, the message "Connect to device successfully" will pop up. Then you can
start using the APP to control the device.
-
24-
EDID LEARNING
The EDID learning function is only necessary whenever you encounter any display on the HDMI
output port that cannot play audio and video properly. Because the HDMI sources and displays may have
various level of capability in playing audio and video, the general principle is that the source will output
the lowest standards in terms of audio format and video resolutions to be commonly acceptable among
all HDMI displays. In this case, a 720p stereo HDMI signal output would be probably the safest choice.
Nevertheless, the user can force the matrix to learn the EDID of the lowest capable HDMI display among
others to make sure all displays are capable to play the HDMI signals normally.
The method on doing EDID learning please refer to the software operation section.
There are
five embedded default EDIDs
as below,
1. Full-HD(1080p@60)-24bit 2D & 2ch
2. HD(1080i 720p@60)-24bit 2D & 2ch
3. 4K2K@60-24bit 2D & 2ch
4. 4K2K@30-3D-PCM2CH
5. 4K2K@60-420-3D-PCM2CH(2ch)
