13
Continued overleaf
ADVANCED PROGRAMMING (MONITOR FUNCTIONS)
Continued from previous page.
No function.
Men 2:
u
Then adjust the settings as required:
-
Button has no function.
-
Changing the function of button :
Intercom function (default setting).
Select the function to assign to button
: Each press on button
selects a different function
which is indicated with blinks (1 to 4 blinks) of the programming LED and in the following
order: auxiliary device 'A1' activation, call to secondary guard unit, second camera '2C'
activation and intercom. When the final selection is reached, the following press returns the
user to the first selection and 1 blink of the programming LED (carousel mode).
-
Changing the function of button :
Activation of auxiliary device 'A1' function (default setting).
Select the function to assign to button
: Each press on button
selects a different function
which is indicated with blinks (1 to 4 blinks) of the programming LED and in the following
order: auxiliary device 'A1' activation, call to secondary guard unit, second camera '2C'
activation and intercom. When the final selection is reached, the following press returns the
user to the first selection and 1 blink of the programming LED (carousel mode).
If an apartment has Tekna Plus and Tekna S Plus monitors, the Tekna S Plus monitors should be configured with
'Intercom with Tekna Plus monitors' mode, as Tekna Plus monitors do not allow an intercom call to a particular
monitor in the apartment to be made (selective intercom call). So when an intercom call is made, all of the
monitors in the apartment will receive the call.
-
Intercom with Tekna Plus monitors:
Intercom with Tekna S Plus monitors (default setting).
To activate the Intercom with Tekna Plus monitors mode: Press button
, and the
programming LED will indicate with 1 blink that the function is in 'Intercom with Tekna Plus
monitors' mode or with 2 blinks that the function is in 'Intercom with Tekna S Plus monitors'
mode.
-
Accessing 'Menu 3' or exiting programming mode:
To access
press button
and the programming LED will blink three times.
'Menu 3,'
To exit programming mode, press button
for 3 seconds, and the programming LED will turn
off (see p. 15).
TEKNA-S PLUS MONITOR
