5
DESCRIPTION OF THE MONITOR
Function buttons:
(*)
In advanced programming mode, the default functions of function buttons
and
can be changed with one of the
following functions at the same time and per button:
'intercom,' 'auxiliary device A1 activation,' 'second camera 2C
activation' or 'call to secondary guard unit'
(see p. 13).
One long press for 2 seconds: with the monitor in standby and the handset on the hook, this activates
ringtone volume mode, with a tone indicating the volume selected. Then each long 2-second press
(before 5 seconds elapse) selects a volume level: maximum, no volume 'night mode,' minimum and
medium, and so on (carousel mode). Note: The 'night mode' status LED blinks red. During a call, the
monitor does not emit a ringtone unless it is an 'apartment front door call.'
One long press for 3 seconds: with the monitor in standby and the handset on or off the hook, this turns the
monitor off. Then one short 1-second press turns on the monitor. After any resetting of the monitor and for
the following 45 seconds, no operation with it can be performed.
One long press for 3 seconds during a call cancels the call on the monitor. If there are more monitors in the
apartment, they will continue with the ringtones of the door panel. During communication with the door
panel, the communication in progress will end.
With the monitor in standby and the handset off the hook, this activates the intercom function (in the same
apartment). One long press until a confirmation tone can be heard will call all of the monitors in the
apartment. To call individual devices, press the button once to call the 'master' monitor, twice to call 'slave
1,' 3 times to call 'slave 2,' 4 times to call 'slave 3' and 5 times to call 'slave 4.' This selective intercom call
mode is only available with Tekna Plus SE, Tekna HF Plus and Tekna S Plus monitors. This only functions
if no call or communication is in progress.
Regardless of the position of the handset, this activates auxiliary device 'A1.'
With the monitor in standby and the handset on the hook, this enables the image from the door panel
configured as main to be viewed (if the bus is busy, the status LED of the monitor will indicate so with a few
quick blinks). With the handset off the hook, this enables audio and video communication with door
panels that have their auto switch-on function activated to be established. This only functions if no
communication is in progress.
In call, a slave monitor enables the image of the door panel to be captured.
With the monitor in standby and the handset on the hook, this makes a panic call to the guard units
configured to receive such calls. With the handset off the hook, it enables a normal call to be made to the
main guard unit. During call reception and communication processes, it enables the lock release to be
activated.
( )
*
( )
*
TEKNA-S PLUS MONITOR
T
Communication with hearing aids:
The handset of the Tekna-S
monitor enables communication with hearing aids equipped with T-mode, making
Plus
conversation possible (inductive loop).
Remember:
Set the hearing aid switch to position T.
