First of all, thank-you for choosing a Golmar product.
Our certification ISO-9001 let us meet the expectations of our customers by manufacturing
good quality products, such as this one.
Customers and users will appreciate its several performances thanks to high manufacturing
quality and strict quality control. Read carefully this instruction manual before using this device in order to
take any advantage and to use it properly .
INTRODUCTION
41
42
Introduction........................................41
Index .................................................41
Starting suggestions.............................41
System operation.................................42
System features ...................................42
Very important note..............................42
Doorpanel installation .............................
Installation of the embedding box........43
Power supply installation.......................44
Door opener installation.......................44
Doorpanel configuration......................45
Platea Uno Monitor .................................
Description ......................................46
Function buttons ...............................46
Monitor connector ............................47
End of line resistor .............................47
EL562 Module..................................47
Monitor installation ...........................48
Programming ...................................49
T-740 Uno Phone ....................................
Description ......................................50
Phone fixing .....................................50
Function button.................................50
Programming ...................................51
Final adjustments and doorpanel closing 51
Programming backbone code ...............52
Installation diagrams ...............................
Video system with coaxial
cable .........................................53-54
Video system with twisted
pair ...........................................55- 56
Optional connections ..............................
D.c. and a.c. door opener. .................57
External button to open the door..........57
Television connection ........................57
Door bell pushbutton connection ........57
Troubleshooting ..................................58
Conformity .........................................59
INDEX
O
O
O
O
O
Do not tighten the screws of the power supply terminal block excessively.
Disconnect power supply when installing or modifying the device.
Before connecting the device, check the connections among doorpanel, monitors, phones and
power supply. Always follow the instructions of this manual.
When starting the device for the first time, or after a change, the system will be blocked during 45
seconds.
In devices with coaxial cable, always use RG-59 o RG-11 cables.
Never use coaxial
antenna cable
. In systems up to 100m you can use
Golmar RAP-5130 cable
, which
includes all the necessary conductors for the installation.
SYSTEM OPERATION
O
O
O
O
O
O
O
O
O
O
O
O
w
w
w
w
Microprocessed video system with
3 wires+coaxial installation or 4 wires+twisted pair
installation
Uno technology.
IP-44 sealed doorpanel and anti-vandal IK-09.
Compatible with Uno monitors and phone.
Compatible with electronic audio systems or video systems with four common wires, three
wires+coaxial or four wires+twisted pair installations.
Unlimited doorpanel number without using commutation units.
Combinable with code general entrance panels, up to 250 internal houses.
Maximum distance between doorpanel and monitor: 200m.
Where the distance from the door panel to the last monitor is largest than 200 m, it will be
necessary to use the digital repeater RD-Plus/Uno.
Phone tones to confirm call and busy line.
Temporized door opening for three seconds.
Direct current or alternative current door opener activated by means of a relay.
In Platea Uno monitors or T-740 Uno/T-940 Uno phones:
Conversations and images are totally confidential.
”Spy-video” function without keeping any line busy (Only Platea Uno).
Call entry from the internal door of the house.
Up to two monitors and one phone in each house without extra power supply.
without making any change on the doorpanel
.
O
To make a call, the visitor will have to push the doorpanel button: some acoustic tones will
indicate that the call has been done. In this moment, the monitor (phone) of the house receives
the call.
O
In devices with several entry doors, the other doorpanel(s) will be automatically disconnected: if
another visitor needs to call, some phone tones will indicate that the line is busy.
O
The call lasts for 45 seconds; the master monitor shows the image 3 minutes after receiving the
call; while the visitor does not perceive it. To see the image in a slave monitor, press the button
, the image will disappear from the monitor which was showing it. If the call is not answered
before 45 seconds, the line will be free.
O
To communicate, lift the handset from the monitor (phone).
O
Communication will last for one minute and a half or until the handset is hung up.
O
To open the door, press the door opener button during the call or communication: one touch
activates the door opener for three seconds.
O
Pages 46 and 50 contain the description of the function buttons.
STARTING SUGGESTIONS
SYSTEM FEATURES
VERY IMPORTANT NOTE
This device is delivered after being set up completely, so that it can be used with
its monitor; if an additional monitor or phone is needed, it must be set up
(pages 49 and 51).
52
If this device is part of a system with general doorpanels, the doorpanel and the
monitor must be set up as shown on page
.
