3
SYSTEM OPERATION
RECOMMENDATIONS
- Preferably use a Golmar
cable (2x1mm²).
RAP-GTWIN/HF
- The installation and handling of these devices must be carried out by
authorised personnel.
- The wiring must run at least
40cm away from any other wiring.
-
before making modifications to the device.
Always disconnect the power supply
- Check all connections before starting the device.
- Always follow the instructions contained in this manual.
To establish communication, press the button below the off-the-hook icon
shown on the screen. Door panel
w
LED
ill illuminate. Communication will last for 90 seconds or until the button below on-the-hook icon
shown
on the screen is pressed. When communication has ended, door panel LED
will turn off and the system will
become free.
To make a call, the visitor needs to press the door panel button: an audible tone indicates that the call is being made
and LED
on the door panel illuminates. At this moment, the apartment's monitor(s) receive(s) the call.
Detailed operation of the monitor is described on pp. 11-2 .
8
Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists) without the
visitor knowing and icon
displayed on the screen will blink green. To view the image from slave monitors 2 or 3,
press one of the buttons of the monitor to display the image. If the call is not answered within 45 seconds, door panel
LED
will turn off and the system will become free.
To open door
or activate auxiliary output
of the door panel, press the button below the corresponding icon
displayed on the screen. A single press activates the lock release or auxiliary output for 3 seconds
, and LED
on the door panel illuminates.
, with the
possibility of setting it to between 0.5 and 10 seconds (see pp. 31-32)
In systems with two access doors, the other door panel automatically disconnects; if another visitor attempts to call, a
number of telephone tones will indicate that the system is busy and LED
on the door panel will illuminate.
The owner of the apartment can activate the lock release by holding the proximity key over the reader. If the proximity
key is held for three seconds, the auxiliary relay output will be activated.
1
2
SOUL S5110/ART 4 VIDEO DOOR ENTRY SYSTEM KIT
