DOOR PANEL INSTALLATION
P
lace the embedding box
.
Pass the wiring through the hole made in the bottom part of
Level and flush the embedding box.
Once the embedding box is placed, remove the protective
labels from the attaching door panel holes
the embedding box
.
.
A
ssembly of the door panel modules
.
Insert the header DOWN marked in the lower module and fix it by screwing the module shafts.
Place the module spacer between lower and next modules, assuring that the spacer adjustment
notches are inside the panel Fix the module by screwing the shafts. Repeat this procedure
in case of door panels with one more module (the maximum number of modules placed
vertically is three
Insert the header UP marked in the last module and fix it by screwing the supplied screws.
.
).
102
DOOR PANEL INSTALLATION
E
mbedding box positioning
.
1650
1850
1450
The upper part of the door panel should be placed at 1,65m. height roughly
The hole dimensions will depend on the number of door panel modules
The door panel has been designed to be placed under most of the environmental conditions
However we recommended taking additional precautions to extend its working life
(visors, covered areas,
…
To obtain optimum image quality on video door entry systems,
avoid direct incidences from light sources (sun, streetlights,
…
.
.
.
,
).
).
1
CE610
125
140
56
Compact
CE615
125
220
56
M
Model
An
Al
P
odules
2
CE620
125
257
56
3
CE630
125 mm.
374 mm.
56 mm.
P
.
reparing the cables entry
Break the bottom flange
In case of door panels with one or more embedding boxes
break the side flanges and link the embedding boxes using
UC junctions
to pass the cables through
.
,
.
101
