All contents copyright 2014, GoldWing RC Version 2.0, Feb 2014
6. An extra servo can be fitted for choke or a mechanical linkage can be used.
7. The fuel tank is preassembled. Complete the installation in the fuselage using zip ties or velcro straps to
hold the tank in position. Connect a fuel line between the tank and carb, a fuel line between the tank vent
and the bottom of the fuselage, and a fill line to a fueling port which can be mounted on the fuselage side
opposite your ignition switch. Make sure your vent line does not come close to any hot exhaust part such as
the muffler or canister. GW recommends the use of small zip ties or fuel line clamps to secure the lines to the
tank.
A barb on the bottom of the fuselage can be fitted for the vent.
8. The MX2 comes with a canister pipe tunnel. Standard muffler, pitts muffler, canister or tuned pipe can be
fitted. If a tuned pipe is going to be used the end of the can tunnel can be removed. The tunnel can be closed
off to accept canisters of all sizes, or stock mufflers. Follow the manufacturer’s instructions for your exhaust
