All contents copyright 2014, GoldWing RC Version 2.0, Feb 2014
3
．
To fit the rudder to the fin, locate the rudder hinge wire and insert. To make it easier to insert twist as it is
inserted.
4. The MX2 can use either closed loop or a rear push pull servo for the rudder. We recommend that you
balance the model assembled before choosing your servo placement.
5. The MX2 is supplied with a high quality set of pull-pull cables and ball-links.
6. Install your rudder servo into the precut locations in the fuselage. Using a fine drill pre-drill the holes and
drop thin CA into the holes to strengthen the wood. You will need 3 inch arms on the servo. Set up your radio
accordingly and center the rudder servo.
7
．
Aluminum dual servo arm are include in the kit, enlarge the control holes with 3mm drill bit.
