All contents copyright 2014, GoldWing RC Version 2.0, Feb 2014
Use the wrench to adjust the pushrod to the appropriate length.
REPEAT FOR THE OTHER SIDE
ENGINE, EXHAUST, & FUEL SYSTEM INSTALLATION
NOTE: There are pictures of different planes in this manual, however, this plane’s engine is assembled the
same way.
1
.
Templates are provided in the kit for both DA 50 and 60 along with the 3W 50 cc. Select the correct guide
for your engine and mark and drill the mounting holes and cut out the center as indicated. Notice that the
engine center line is offset to the left to compensate for the right thrust built into the engine box.
2. Fit the Cowl and measure the distance from the engine bulkhead to the front of the cowl, add approx 2-
3mm for the spinner back plate and this is the length that your engine should be set Using the correct length
