manualshive.com logo in svg

Goldweb GW-WR151N, User Manual

Share
Download
Goldweb GW-WR151N User Manual Download Page 65

GW-WR151N  

      

                                                                     

 

 

59 

 

In this page, you can configure the DMZ host for the appointed WAN connection. 
The parameters of the DMZ Setting page are described as follows: 

Field 

Description 

WAN Connection 

Select the WAN connection for DMZ configuration.

Enable DMZ 

Enable or disable the DMZ function. 

Host Address 

Enter the IP address of a computer or server to be 
set as a DNZ host. 

 

 Warning: 

When PC on the internal network is set to be the DMZ host, all the 
interfaces of the PC will be exposed to the Internet and the PC will risk 
great security. Unless necessary, please do not set the DMZ casually. 

After setting the DMZ host, the mappings of all the interfaces will point to 
DMZ host and the port mappings that points to other hosts will be invalid. 

 

6.4.14   DDNS 

Dynamic DNS (DDNS) is mainly used to realize resolution between fixed domain 
names and dynamic IP addresses. For a user that uses a dynamic IP address, 
after the user obtains a new IP address when accessing to the Internet, the 
dynamic domain name software installed in the host sends the IP address to the 
dynamic domain name resolution server provided by the DDNS service provider 
and updates the domain name resolution database. When another user on the 

Summary of Contents for GW-WR151N





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands