Goldweb GW-WR151N, User Manual

Page: 59 / 92

GW-WR151N
53
The parameters in this page are described as follows:
Field Description
Enable Enable or disable the stream classification rule.
IP Protocol Type You can select IPv4 as the IP protocol type.
Input Interface You can select it from the drop-down list:
Source MAC Address The source MAC address that needs to match. You
can leave this field blank.
Source IPv4 Enter the source IPv4 address for the QoS rule.
Source Mask Enter the source IP mask for the QoS rule.
Destination IPv4 Enter the destination IPv4 address for the QoS
rule.
Destination Mask Enter the destination IP mask for the QoS rule.
DSCP To match the DSCP value. Whether the rule
matches the DSCP value.
Protocol Select a matched protocol in the drop-down list or
you may select
Not Match
Source Port Range Enter the source port range for the QoS rule.
Destination Port Range Enter the source port range for the QoS rule.
Bind to Queue Bind the matched data stream to the corresponding
queue.
DSCP Mark It is used to mark DSCP for the matched data.
802.1P Mark You can select Not Mark or 0 ~ 7 from the
drop-down list.
After finishing the settings, click the Submit button to apply the settings.
6.4.9 Access Control
Choose Advanced > Access Control > Remote Access Control to display the
Remote Access Control Configuration page.
In this page, you can configure whether to allow a specified remote host to access
the Web and Telnet services in the system through a specified service port. By
default, remote access to the Web and Telnet services is disabled.