Goldweb GW-WR151N, User Manual

Page: 39 / 92

GW-WR151N
33
The parameters in this page are described as follows:
Field Description
Enable Wan Select the Enable Wan check-box to enable a WAN
connection.
Service Type Set the service type.
IP address Enter the WAN IP address provided by the ISP. The
parameter must be entered.
Subnet mask Enter the WAN subnet mask provided by the ISP. It
varies with the network type. It is usually
255.255.255.0 (Class C).
Default Gateway IP Enter the IP address of the gateway provided by the
ISP. It is the IP address used for connecting to the ISP.
PPTP Server Enter the PPTP server.
PPTP ID Enter the PPTP ID. This parameter must be entered.
PPTP Password Enter the password for PPTP dialup provided by the
ISP. This parameter must be entered.
Confirm Password Enter the password again to confirm it.
Authentication Method You can set the authentication method to AUTO , PAP ,
CHAP , and MS-CHAP .
MTU Set the maximum transmission unit. The default value
is recommended.
Enable Nat Network Address Translation (NAT) determines how
the router processes inbound traffic. Secured NAT
provides a secured firewall to protect the computers on
the LAN from attacks from the Internet, but might
prevent some Internet games, point-to-point
applications, or multimedia applications from
functioning. Open NAT provides a much less secured
firewall, but allows almost all Internet applications to
function.
Nat Type Set the NAT type. Two NAT types are available:
SymmetricNat and ConeNat .
Domain Name Server
Assignment Select Manual . Enter the IP address of your ISP’s
primary DNS server, that is, Domain Name Server
(Primary) IP ). Enter a secondary DNS server address