10
6
6. Orient the Handlebar (47) as shown.
Tip: Avoid pinching the Pulse Wire (32).
Attach the Handlebar (47) to the Upright (3) with
two M8 x 18mm Screws (46).
32
46
47
3
7
7. The Console (6) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow
it to warm to room temperature before you
insert batteries. Otherwise, you may dam-
age the console displays or other electronic
components.
Remove the screws and the
battery covers, insert batteries into the battery
compartments, and then reattach the battery
covers.
Make sure to orient the batteries as
shown by the diagrams inside the battery
compartments.
To purchase an optional power adapter,
call the telephone number on the cover of
this manual. To avoid damaging the con-
sole, use only a manufacturer-supplied
regulated power adapter.
Plug one end of the
power adapter into the receptacle inside the
indicated battery compartment, and route the
power adapter through the notch in the battery
cover. Then, plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
6
Screws
Battery
Covers
Receptacle
Notch
Summary of Contents for CYCLE TRAINER 400 R
Page 4: ...4 STANDARD SERVICE PLANS ...
